VBT Syntax - TheExec - Flow

TheExec.Flow

TestLimit

TheExec.Flow.TestLimit(resultVal, lowVal, hiVal, lowCompareSign,
highCompareSign, scaletype, unit, formatStr, TName, compareMode, pinName,
forceVal, forceunit, customUnit, customForceunit, ForceResults, TNum)

Parameters most used:

resultVal (required): Which the result value will been written.
lowVal, hiVal : The low and high limits. Default is lowVal <= resultVal <= hiVal.
unit: The unit of measurement
- unitAmp unitVolt unitDb unitHz unitTime .
TName: A test name to be datalogged. If left blank, test instance's name will be used.
pinName: The pin name to be datalogged.
forceVal, forceunit: The test condition value and unit.
ForceResults: Whether to force a pass or fail or to use the limits specified in a flow table.

For an example:

    TheExec.Flow.TestLimit  resultVal:=Vout_Measure, _
                            unit:=unitVolt, _
                            Tname:="Output_Voltage", _
                            pinName:=vout_pin, _
                            forceval:=vin_pin_voltage, _
                            forceunit:=unitVolt, _
                            forceresults:=tlForceFlow, _
                            lowval:=VOT_LowLimit, _
                            hival:=VOT_HiLimit

TestLimit​

TestLimit